Please click the link below to view an instructional video on setting up your safe:

Mycube Mini Touch Setup

You can also refer to the step by steps instructions below:

1. Open the door, press **01#.
2. You will hear “please enter your password.”
3. Enter a 4-6 digit password and press #, you will hear "please do again."
4. Re-enter your password and press #.
5. Important: To complete the setup of your safe, you must register your fingerprint:
   a. Please Click Here.
   b. Select Setting Up and Operating Your Safe.
   c. Select Fingerprint Registration for instructions.

Please click the link below to view an instructional video on setting up your fingerprint:

Mycube Mini Touch Fingerprint Setup

You can also refer to the stey by steps instrcutions below:

You must register your 4-6 digit passcode before completing fingerprint registration.

1. Open the door, press **02#, you will hear “Please verify.”
2. Enter your password and press #.
3. After verification you will hear “Please put your finger on scan sensor”
4. Then you will hear “Please do again” twice.
5. When your fingerprint registration is completed successfully, you will hear “Fingerprint registration complete.”
6. If verification fails, you will hear “verification failed”, system will quit. Please restart the process.

Please click the link below to view an instructional video on installing your safe:

Installing Your Safe

The following link is an illustration of the installation process:

Installing Your Safe Illustration

Please click the following link for an instructional video on removing your keyhole cover:

Removing Keyhole Cover

To register your Mycube safe please click the link below:

Register Your Safe

Refer to the instructions below to open & close your safe

1. Open the Door
2. Enter your password and press #, or place your registered finger, you will hear “verification complete.”
3. If the password or fingerprint is not right, you will hear “verification failed.”
4. If the wrong password has been entered 3 times in a row, the keyboard will be locked for 5 minutes.
5. If the wrong fingerprint has been placed 5 times in a row, the scanner will be locked for 5 minutes.
6. Close the Door
7. Press #

Refer to the instructions below to reset your code:

Mycube Mini Touch Reset Code

You can also refer to the instructions below:

1. Open the door, press ** and the current password and press #. You will hear “please enter new password”
2. Enter the new password and press #, you will hear “please do again”
3. Re-enter your password and press #.
4. Your password change is complete!

Refer to the instructions below to reset your safe:

1. Open the door, press **999#, you will hear “please verify.”
2. Enter your password or registration fingerprint and press #.
3. You will hear “reset complete.”

Refer to the steps below to adjust your volume:

1. Open the door and press **03# (*The keyboard only shows 2, 8, *, #)
2. Press 2 - To turn up the volume
3. Press 8 - To turn down the volume
4. Press * To quit without saving
5. Press # - To save and quit

If you input an incorrect digit, press * to clear the keypad.