Mycube Mini Gen 3
Mycube Mini Gen 3 / Setting up your safe / Setup /

Forgot Code

With Manual Key

If you forgot your code and have your manual key, please click the link below to view an instructional video on opening your safe using your safe key:

Using Your Manual Key

Refer to the link below for an instructional video on resetting your passcode:

Resetting Your Code

Without Manual Key

If you forgot your code and do not have your manual key, please send an email to support@mycubesafe.com and a member from our Customer Service Team will contact you to provide further assistance.

Mycube Mini Gen 3 / Setting up your safe / Setup /

Dead Batteries

With Manual Key

If your batteries are dead and you have your manual key, please click the link below to view an instructional video on opening your safe using your safe key:

Using Your Manual Key

Refer to the instructional video link below on changing your safe's batteries:

Replacing Your Batteries

Without Manual Key

If your battery is dead and you cannot locate your key, use an external battery pack with a USB port to provide power to the keypad. Here are the parts we recommend. You'll want to get these specific parts:

USB - USB Amazon Product

Power pack - Power Pack Target

If your keypad does not function with the use of a power pack, please send an email to support@mycubesafe.com and a member from our Customer Service Team will contact you to provide further assistance.

Mycube Mini Gen 3 / Setting up your safe / Setup /

Lost Key

If you lost your manual key and your safe still has power, use your code to open your safe.

If you are interested in purchasing a replacement key, please send an email to support@mycubesafe.com and a member from our Customer Service Team will contact you to assist with ordering a replacement key.

Mycube Mini Gen 3 / Setting up your safe / Setup /

Receiving An Error

There can be several reasons why you are receiving an error when attempting to open your safe. Please go to the Troubleshooting section for solutions to common errors or send an email to support@mycubesafe.com for further assistance.

Mycube Mini Gen 3 / Setting up your safe / Setup /

Unable To Reset Code

If you are unable to successfully reset your code, try the process with your manual key inserted in the safe.

  1. Insert the manual key and close the safe door
  2. Press CLEAR 2x, “PROG” will appear on the screen
  3. Press 68 LOCK, “NEU” will appear on the screen
  4. Press your 4-digit code, and press LOCK*. Your code is now set.

Note: Apply a little pressure to ensure that the door is closed securely after pressing LOCK, once it is locked, you can remove the key.

Mycube Mini Gen 3 / Setting up your safe / Setup /

E-code Message

E-code means "error code". This error will appear if you are typing in the incorrect code. If you can't remember your code, use your manual key to open the safe then reset your code. Refer to the following video for instructions on resetting your code:

Resetting Your Code

Mycube Mini Gen 3 / Setting up your safe / Setup /

Corroded Batteries

If the batteries have corroded, use white vinegar and Q-tip to clean off the coils. Once coils are clean install 4AA batteries.

If that doesn't work, you will need a replacement battery pack. Please send an email to support@mycubesafe.com and a member from our Customer Service Team will contact you to provide further assistance.

Mycube Mini Gen 3 / Setting up your safe / Setup /

Error 1 Message

Error 1 appears when you have entered the wrong code. Retry code entry using the correct code. If you forgot refer to the instructions below.

With Manual Key

If you forgot your code and have your manual key, please click the link below to view an instructional video on opening your safe using your safe key:

Using Your Manual Key

Refer to the link below for an instructional video on resetting your passcode:

Resetting Your Code

Without Manual Key

If you forgot your code and do not have your manual key, please send an email to support@mycubesafe.com and a member from our Customer Service Team will contact you to provide further assistance.

Mycube Mini Gen 3 / Setting up your safe / Setup /

Error 2 Message

If the Error 2 code appears, make sure the bolts are not getting jammed. Try to lock the safe with the door swung open. If this works, then try removing the little square rubber pieces on the inside of the door frame to resolve the error. If that does not resolve the issue, send an email to support@mycubesafe.com and a member from our Customer Service Team will contact you to provide further assistance.

Mycube Mini Gen 3 / Setting up your safe / Setup /

Batt-Hi Message

The Batt-Hi message appears when the safe is already locked and Lock is pressed. If the safe looks open and pressing Lock still gives Batt-Hi message, use manual the key to fully open the safe.

Please click the link below to view an instructional video on opening your safe using your safe key:

Using Your Manual Key

Mycube Mini Gen 3 / Setting up your safe / Setup /

Safe Locked Before Setup

If you are setting up your safe for the first time and press Lock and it locks the safe before you have set a code, try using the factory default code 1234 to open the safe. If that does not work, open the safe with the manual key. If you are still unable to open the safe, please send an email to support@mycubesafe.com and a member from our Customer Service Team will contact you to provide further assistance.

Mycube Mini Gen 3 / Setting up your safe / Setup /

Jammed Bolt

When locking the safe, keep the door held closed until after you have pressed Lock. Wait for 1 second after the LED screen says "CLOSED", otherwise the door will spring open and the bolts will jam. If the bolts jam, you can insert the manual key to unjam the bolts.

Mycube Mini Gen 3 / Setting up your safe / Setup /

PROG is not Appearing

When setting up your code, PROG should appear on the keypad. If you don't see "PROG" on the screen, this means that your safe is locked - even if it doesn't appear to be. When the safe is in the locked position, you will not be able to program/reset your code. In order to correct this, use your manual key that came with the safe to unlock the safe. Remove the keyhole cover with Mycube logo to unlock the safe, and leave the key in the door. Then proceed with programming/resetting your code until you see PROG appear and you go through the steps. Once the safe is programmed and back in the locked position, you can remove the manual key and place the keyhole cover back on the keypad.

Mycube Mini Gen 3 / Setting up your safe / Setup /

Mykit Accessory Pack

Every safe come with an accessory pack which contains a set of 4 AA batteries, wrenches and a set of keys. Please keep your manual keys and wrenches outside of your safe for easy access in the event that you get locked out of your safe or need to change the batteries.

Mycube Mini Gen 3 / Setting up your safe / Setup /

Battery Replacement

Replace your safe's batteries every 12 months for optimal performance. Please click the link below to view an instructional video on replacing your safe batteries:

Replacing Your Batteries