Setup
Please click the link below to view an instructional video on setting up your safe:
You can also refer to the step by steps instructions below:
- Open the door, press **01#
- You will hear “please enter your password.”
- Enter a 4-6 digit password and press #, you will hear "please do again."
- Re-enter your password and press #.
- You can now proceed with setting your biometric fingerprint
Please click the link below to view an instructional video on setting up your 6-digit code:
Please click the link below to view an instructional video on turning your vibration on and off:
Please click the link below to view an instructional video on using your cable lock:
Fingerprint Registration
Please click the link below to view an instructional video on setting up your fingerprint:
You can also refer to the stey by steps instrcutions below:
You must register your 4-6 digit passcode before completing fingerprint registration.
- Open the door, press **02#, you will hear “Please verify.”
- Enter your password and press #.
- After verification you will hear “Please put your finger on scan sensor”
- Then you will hear “Please do again” twice.
- When your fingerprint registration is completed successfully, you will hear “Fingerprint registration complete.”
- If verification fails, you will hear “verification failed”, system will quit. Please restart the process.
*Note: If there's any issue with the fingerprint while registering it for first time, clear the safe, by pressing *. Then place the middle of your fingerprint on the sensor first. Rotate slightly to the right side, then rotate slightly to the left side so that the sensor captures the full fingerprint with the three reads. *
Opening and Closing Your Safe
Refer to the instructions below to open & close your safe
- Open the Door
- Enter your password and press #, or place your registered finger, you will hear “verification complete.”
- If the password or fingerprint is not right, you will hear “verification failed.”
- If the wrong password has been entered 3 times in a row, the keyboard will be locked for 5 minutes.
- If the wrong fingerprint has been placed 5 times in a row, the scanner will be locked for 5 minutes.
- Close the Door
- Press #
Resetting Your Code
Refer to the instructions below to reset your code:
You can also refer to the instructions below:
- Open the door, press ** and the current password and press #. You will hear “please enter new password”
- Enter the new password and press #, you will hear “please do again”
- Re-enter your password and press #.
- Your password change is complete!
Volume Adjustment
Refer to the steps below to adjust your volume:
- Open the door and press **03# (*The keyboard only shows 2, 8, *, #)
- Press 2 - To turn up the volume
- Press 8 - To turn down the volume
- Press * To quit without saving
- Press # - To save and quit
Please click the link below for an instructional video on how to turn your safe's voice on or off: